Товар добавлен в корзину
Перейти в корзину

TOMEI 1361101151 Прокладки ГБЦ комплект TOMEI Metal Head Gasket Set SUBARU EJ255 2004-2008 WRX/EJ257 STI 2004+ 101.2-1.5mm

Артикул 1361101151
Код товара 26146
Наличие
Нет в наличии
Цена 10 900 ₽
В список желаний

Описание товара
Обсуждение товара
Видео
Где установить
TOMEI 1361101151 Прокладки ГБЦ комплект TOMEI Metal Head Gasket Set SUBARU EJ255 2004-2008 WRX/EJ257 STI 2004+ 101.2-1.5mm

Brand: Tomei
Product: Metal Head Gasket Set
Part Num: 1361101071 (0.7)
Part Num: 1361101101 (1.0)
Part Num: 1361101121 (1.2)
Part Num: 1361101151 (1.5)

SPECIFICATIONS:
- Bore: 101.2
- Gasket Type: Super Grommet
- Material: Stainless Steel

FEATURES:
- Head Gasket Structure (Bead Type, Grommet type, Super Grommet Type):
There are several different metal head gasket designs available which vary in sealing, durability and costs.

- Compression Adjustment:
Since the cylinder capacity can fluctuate with the thickness of gasket used, the compression ratio can be adjusted with the thickness of the gasket. The gasket thickness will help with the final adjustments to get your setting closest to the target compression ratio.

- Heat Conductivity of Stainless Steel:
Stainless steel was chosen to be the material of choice to make the Metal Gaskets with because of the heat conductivity efficiency of the stainless steel material to evenly distribute the heat and aid with cooling. This will greatly improve reliability and reduce the chances of problems.

- The Strength of Stainless Steel:
The natural high tensile qualities of Stainless Steel greatly helps with increasing the joint ridged of the cylinder head with the cylinder block. This helps minimize the engine from warping when under severe stress loads that performance engines go through when running high power applications. The result is improved durability and added power gains.

- Maximum Seal:
With the increase in combustion pressure from performance engines in recent years, an enormous burden is placed on the head gasket. To maintain the highest precision possible in a high performance assembled engine strict measurements and maximum sealing Is required with the right torque values on each head studs and bolts are required to keep everything together to gain the most out of your engine.
When bolts are screwed into place, regardless of the bolt type and strength qualities of that bolt, the pressure is always on the first 3 threads of the screw which takes the most stress. If the cylinder block is badly distorted then the screw threads can be damaged as well. Stud bolts with dynamic designs allows the screw bolt to take on equal stress on all threads which will greatly secure maximum sealing pressure for race and airplane engines.

- Super Grommet Design:
The factory type is made from metal but the design is the bead type which is not as effective in sealing as the super grommet design. Most aftermarket metal gaskets are of the grommet design which is better but the Tomei Super Grommet design gives you the highest sealing efficiency possible and increased durability. (Super Grommet=Dual Sealing System from bead structure and metal grommet)

- Custom Rib Design (Improved Seal Around the Water Gallerie):
With each model change from Subaru engineers the improved engine design from the GC8 to GDB and A models had the increased the rib of the outer bore diameter which improved the gas sealing characteristics. But the results of that change made the water and oil galleries seal decrease. So when the power is increased there is also the increased possibility for oil and water leaks to occur. Tomei engineers has a second look at the design of the rib height and the Super Grommet Design and we have achieved an overall improvement in overall seal.

- Various Sizes Available:
Tomei had made 2 types of thickness available for the better option for you to achieve your desired compression ratio for your application. Now you can build an engine with higher accuracy to suit your needs.

Available Sizes:
- Bore: 101.2, Thickness: 0.7mm
- Bore: 101.2, Thickness: 1.0mm
- Bore: 101.2, Thickness: 1.2mm
- Bore: 101.2, Thickness: 1.5mm
Рейтинг:
(проголосовало 0)
  • Обсуждение товара
Загрузка комментариев...
Где установить

Успенский ралли техника

г. Москва, ул. Речников д.29 стр.5
тел. +7(495)287-33-33

Вход

Задать вопрос

нет
Я не робот

Ваша заявка принята! Наши сотрудники свяжутся с Вами в ближайшее время